wicked curve complete CDI ignition kit for minarelli V1

wicked curve complete CDI ignition kit for minarelli V1 - DC version

$284.99

qty:

here's what ya get in this PARTYYY!:

4 of BLUE 16-14 gauge electrical spade connector - female ($1.96 value!)
2 of M6 allen bolts - plain finish - 25mm ($.69) ($1.38 value!)
1 of minarelli V1 flywheel nut - m10 x 1.25 ($9.99 value!)
1 of parmakit cdi box with wicked ignition curve for sooo many bikes ($70.99 value!)
1 of wicked 12v regulator rectifier ($45.99 value!)
1 of wicked CDI stator ($69.99 value!)
1 of wicked CDI stator plate - 80mm ($34.99 value!)
1 of wicked CDI flywheel - minarelli v1 ($120.00 value!)

this ain't yer run of the mill CDI bubby boy....this is a lovingly curated collection of bespoke gizmos and techno-wizardry sure to please any mopedder. OEM quality euopean products ensure many years of reliable spark and lighting! this 12v CDI features 90w of accessory power that will allow you to fulfill even your most wild fantasies. with wicked curve CDI box this ignition will keep your temps at bay! designed to be ran as a 12v AC or DC system. amazing!

for minarelli V1 !!! fan available here

note this CDI does not use a woodruff key! you will need an ignition micrometer or other accurate piston depth measuring method to properly install and time it. flywheel features dual timing marks for clockwise and counterclockwise rotations.

NOTE! you MUST use the included flywheel nut! if you use an original nut, it will bind up and be extremely hard to remove.

uses a 19 x 1.00mm flywheel puller!!

wiring:
red goes to CDI box
blue goes to ground
yellow goes to regulator/lights
white goes to accessory (see instructions!!)

DC version!! includes the wicked reglator rectifier!!! the cool thing about the wicked regulator rectifier is that you can run it as a DC half wave rectifier or as an AC regulator, so really it's an AC/DC choose your own adventure!

comes with stator, stator plate, stator plate mounting screws, flywheel, and wicked curve CDI box!

universal CDI box mounting brackets available!!!

NOTE! you MUST use the included flywheel nut! if you use an original nut, it will bind up and be extremely hard to remove.

does not come with a flywheel nut or spark plug boot!!

flywheel weighs in at an impressive 470g!!

here are some other ignition flywheel weights for comparison:

HPI mini rotor = 345g
powerdynamo = 710g
bosch points flywheel = 838g
treats cdi = 886g

90mm OD flywheel

NOTE! you MUST use the included flywheel nut! if you use an original nut, it will bind up and be extremely hard to remove. now that you've read this, here are the INSTRUCTIONS!!!

rate this moped part be the first!

treatland