the freddy KREIDLER flory basic carb upgrade gift set

$75.00

alternate reality price $67.99

qty:

here's what ya get in this PARTYYY!:

1 of NEW bing 15mm CLONE carburetor puch moped - version 1.5 ($50.00 value!)
1 of dellorto SHA 2mm carburetor shim - 20mm OD ($4.99 value!)
1 of puch bing METAL hi flow filter ($14.00 value!)

at last!!!! finally after some wrenching days after the treatland grind me and aaron were workin on our newly beloved kreidlers and found out a what shim works to mount a puch 15mm bing to a kreidler stock intake! then pop this nifty filter on for a super rad replacement!!!! furthermore (if you plan on running stock) you can use your old atomizer and jet from the original carb if you have it and it will work. the jets are smaller size though. but anyway, you can use normal bing jets with this 15mm bing carb uprade!! yesssss!! idles so good, is faster, gets lunch faster because everyone needs to treat out! -rod

your original throttle cable WILL NOT WORK with this carburetor. what do you do?!?! you modify one!! like this:

grab a throttle cable here. then, you need to get a miniest knarp here!

you probably wanna just take the adjuster that comes with the carb off, then attach the smaller end of the cable into the throttle slide. the larger side may or may not work at your throttle side, so you cut it off and use the knarp where you need it to be on the throttle for tension. you MAY need to shorten the cable for more slack.

now youre blastin, graduate, its your party!!!

rate this moped part be the first!