puch za50 starter cable

$7.49

:HERE NOW!!

qty:

puch za50 starter cable!!!!!!! for the screw type (most common) starter adjuster, seen in photos above

**please note no adjuster is included as ZA50 does not use one!**

cable is beefier than the original, and has more meat on the barrel end so it wont snap on ya. still fits in the starter sleeve but may require a small amount of filing to do so.

rejoice, the day has come!

housing is about 38" long
cable is around 45 inchers

taco rating taco rating 5 of 5

5 of 5 Total Reviews: 1 give your taco rating here

3 taco eaters like this review

Great Part!	December 3, 2017
taco eater : Trevor Christenson from Fort Collins, CO United States

Cable works perfect!, its the perfect length. You will need to remove the cable from the housing and install the nut and plastic "cup" before installing it. Be sure to coat the cable with grease before putting it back into the housing. Don't be a fool like me, ONLY REMOVE THE SMALL UPPER NUT THAT THE CABLE GOES INTO, I removed the adjuster nut as well and had to re-adjust everything, plus I probly over-tightened the adjuster nut and I may have damaged the inner cable. Its currently working perfectly! Again this cable is great, my fault I removed the adjuster nut. If you accidentally do, just don't over-tighen it!!!. Best luck to my moped friends!!

Was this review helpful to you?

treatland