puch E50 clutch arm

puch E50 quality RED PAD clutch arm segment

$18.99

:*sorry none today*

qty:

clutch arm segment for puch E50 one speed clutches - use em on 2 shoe, 3 shoe, kick start, performance, stock. . . for using on two shoe you must punch out the pins as they don't line up right. you'll se what i mean. it's not hard.

these come from the kick start clutch and super good quality. i have some on a two shoe in my magnum man. you have to get the pin out to use these on two shoe plates and some three shoe plates. you may also have to sand down the pad some to fit it in the bell. worth it tho. these are my favorites!

sold individually

one of these clutch arms weighs 3oz by itself

taco rating taco rating 5 of 5

5 of 5 Total Reviews: 2 give your taco rating here

2 taco eaters like this review

I run a pair of these in my Newport	February 14, 2011
taco eater : John Kiniston from Tucson, AZ

They work great, Pulled out the roll pins and used two of those black kickstart springs.

Was this review helpful to you?

2 taco eaters like this review

these pads work great..	October 11, 2010
taco eater : Tim from San Francisco, CA United States

I first installed these with out shaving the pads down and what do you know it didnt work.. it was slightly grabbing at a dead stop making the bike want to take off with out any throttle.. so i also noticed the back of the arm where the adjument screw is.. that metal part was scraping my bell.. could be due to a warped clutch plate but regardless i shaved that metal down as well.. made it nice and round corner so it doesn't catch a sharp edge if my plate warps while riding..

Was this review helpful to you?

treatland