treatland

genuine dellorto PHBG carburetor needles
	$7.99 dellorto needle size First, Select dellorto needle size                      qty:

for use in all dellorto PHBG carburetors. change your performance, to fat? to lean? change it! the thickness and taper of the needle will determine in combination with everything else, when and how much. get it. we normally carry - W3, W4, W5, W6, W7, W8, W9, W10, W11, W12, W13, W14, W16, W17, W18, W19, W20, W21, W22, W23, W24, W25, W26 and D50. if they're not there in the drop down then we will have em in a week or so. NOTE!!! if the size/color/make that you want is not showing up in the drop down menu above, that means it's out of stock for now. you'll have to find an alternate size/color/make or wait til the one ya want is back in stock! sry! taco rating 5 of 5 Total Reviews: 5 give your taco rating here

2 taco eaters like this review

Listing Of Needle Taper Angles July 12, 2022 taco eater : Michael Forrest from Jackson Heights, NY United States   I did the calculations and redid all the Dellorto needle listings to include the taper angles. This is important because the bigger the angle, the "richer" the needle will make the jetting at mid throttle. Here's my page with the listings: https://dragonfly75.com/moto/jettingDellOrto2.html Was this review helpful to you?

1 taco eaters like this review

It's all about fine tunning May 27, 2016 taco eater : Countryobtunning from Princeton , MA United States   These needles are made for fine tunning so be very careful. When going leaner on gas, I read some where to use high octane during testing for extra insurance. Don't mess around read the charts first Was this review helpful to you?

0 taco eaters like this review

excellent February 8, 2013 taco eater : rg from KY, us   excellent.  uhhhhh. oh yea.  that old tractor is wrong.  you have to find it.  but i wont tell!!!!!.   they got the wrong dimensions.  check elsewhere, but no there. Was this review helpful to you?

1 taco eaters like this review

That old Tractor! July 11, 2012 taco eater : Dave from Michigan   This Old Tractor changed the URL http://www.thisoldtractor.com/gtbender/dellorto_slide_needle.htm#gtb_slide_needle_specifications_for__phbg_motorcycle_carburetors_-w_slides- Was this review helpful to you?

4 taco eaters like this review

Here's the link to a chart with the values for eac July 30, 2011 taco eater : Michael Williams from Austin, TX United States   http://www.thisoldtractor.com/gtbender/print/dellorto_slide_needle_slide_needle_specifications_for_phbg_carburetors_-w_slides-.htm Was this review helpful to you?