dellorto PHBG DS 20mm carburetor

dellorto PHBG 20mm DS carburetor

$119.99

:HERE NOW!!

qty:

***OLD STYLE CAP DISCO DEAL***

this is the edition of PHBG carbs that mount with hose clamps and rubber hose to the intake. this style of mounting can reduce vibrations to the carb and be a little tighter and less prone to air leaks than a clamp style carb that doesn't quite match up. these carbs have three jets, pull choke, air mixture screw, and endless tuning opportunities thanks to a wide variety of needles, throttle slides, jets, etc. they solve many of the problems had with old inefficient carbs on motobecane, peugeot, puch, minarelli, sachs, garelli...

20mm - spigot style - pull choke

the dellorto 20mm DS carburetors generally* come with this set up so you can plan your tuning (generally = the jets may or may not be exactly the same - the atomizer will be the same for sure)
atomizer = 260 AN
main jet = 94
idle jet = 40
starter jet = 60
slide = 30
needle = W2

taco rating taco rating 5 of 5

5 of 5 Total Reviews: 1 give your taco rating here

0 taco eaters like this review

i like it	March 3, 2011
taco eater : patrick norris from savannah, GA United States

fits same rubber mount as 19, doesnt have the white plastic cable lock thing has a cool metal one and is easier to switch the needle position , came with au atomizer 264 , i bit rich at the moment, probably want the 260-262, still investigating needle size and slide. but overall , i like it .

Was this review helpful to you?

treatland