batavus + trac stock 50cc piston

batavus + trac stock 50cc piston - 40mm

$50.00

:*sorry none today*

qty:

stock 50cc 40mm piston for some batavus + trac mopeds!

piston measurements - 46mm total length of piston (not including crown), 23mm from wrist pin to bottom of piston, 23mm from wrist pin to top of piston (not including crown).

40mm piston

2mm FG rings

taco rating taco rating 5 of 5

5 of 5 Total Reviews: 1 give your taco rating here

1 taco eaters like this review

Needs slight modification	March 13, 2019
taco eater : Michael Mills from worcester, MA United States

For Daelim DP50E engines, you will need to take a little off the skirt. once you master that, youre golden.

For Daelim M56 engines the moped wiki states the following:

"Because of the different expansion qualities and the conductivity of the M-56 aluminum cylinder in comparison to the M-48 cast iron cylinder, the configuration of the two pistons is different. And for this same reason, the piston material is different. So both pistons are not interchangeable; and the must be separated very carefully. Only the piston rings of both the M-56 and the M-48 pistons are exactly the same. "

Was this review helpful to you?

treatland