TEFLON coated 45mm replacement PISTON for TOMOS alukit ONLY
TEFLON coated 45mm replacement PISTON for TOMOS alukit ONLY
 
  $34.99
alternate reality price $24.99

 :*sorry none today*

Free Shipping
qty:

 
 
teflon coated 70cc 45mm single ring replacement piston for the tomos 45mm alukit

this will ONLY work for the 45mm tomos alukit as the bore is slightly larger meaning this piston will fit tight in other 45mm reed kits.

this is the ultimate race edition treatshq branded designed 6/26/2013

45mm teflon coated with 1mm ring! oiling holes on the wrist pin boss!

meeeeasurements -

total length - 50mm
25mm piston height (center of wrist pin to top)

PLEASE READ - 1mm rings are very delicate so please install with care and precision! omg rad we finally got a replacement ring!

the teflon coating will come off very quickly, the true power of this piston is a single 1mm ring and extra oiling holes on the wrist pin. no need to be alarmed. do the extra rpm come from a coating? do i need to answer that?

taco rating taco rating 4.5 of 5 4.5 of 5 Total Reviews: 6 give your taco rating here

  0 taco eaters like this review
 
5 of 5 No more piston rocking sound and better compressio November 26, 2021
taco eater : Rat rodder from new york, NY United States  
Works great for old kits that are in need of a new piston and doesn't clatter around making it quieter

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Gainss February 18, 2021
taco eater : Matthew Mulligan from Terryville, CT United States  
Single ring revs your engine quicker and holds higher rpms. Those are the only known gains specific to this piston I had. I did quite a few things when I swapped in the piston. So I can’t really speak on power gains.

Don’t worry about that Teflon. It’s more for looks. It peels right off when opening the window. Won’t last long in the cylinder.

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 perfect in 70cc AJH April 27, 2015
taco eater : rodney from brisbane, CA United States  
e50, case matched, 70cc ajh, 4 petal intake with malossi reed block, mikuni 24, mlm cali pipe, points ignition, teflon coated piston with normal 70cc hi hi head, no other modifications, went 64mph. thats my review.

Was this review helpful to you?

  3 taco eaters like this review
 
5 of 5 works with Athena AJH September 11, 2014
taco eater : Adam Riggsby from Rutland, MA United States  
works well with the Athena AJH. corrects spacing issue on the port timing, but you still gotta countersink a head! the Wiseco 16.3 needle bearing works PERFECT for this piston. go fast!

EDIT : at the dude from connecticut, you need a countersunk head like i said. without it, it runs like crap because it has a squish of like 4mm.

Was this review helpful to you?

  0 taco eaters like this review
 
1 of 5 Athena ajh July 19, 2014
taco eater : tyler collins from Clinton , CT United States  
They said it would work with athena ajh, my puch ran sweet before I put the piston in, swapped to this and it runs like absolute garbage. I thought it could be something elts I did like a bum gasket or something. Tried with new gaskets and still runs like shit. Went back to stock piston and it runs sweet again. Huge bummer!

Was this review helpful to you?

View All Customer Reviews