taco eater :
Kenneth Sanders II from Hartford, CT United States
City Bikes have short bendys so the sidecover will clear, this bendy is too tall and unable to thread the stock bendy with what is on this cable.
But this works perfectly without the sidecover if you clip off the knarp end from the grip side of the cable with some linesman pliers, and grind or clip the tip of the carb side knarp a little for fitment of the stock Dellorto carb slide.
The length is perfect for stock outter casing routing. Grip side slide has plenty of cable slack to pull through after taking off the cable knarp, trim the rest after tightening the set screw and turning the throttle open all the way.
Twist and go after all is done!
Or just make your own cable using the same inner cable and outter cable lengths mentioned here if you have the time to.
Was this review helpful to you?
0 taco eaters like this review
brap
May 15, 2021
taco eater :
Anonymous Person from Portland, ME United States
Fit perfect on a stock 1975 Puch Maxi S. Yee haw!
Was this review helpful to you?
0 taco eaters like this review
Well gah dem
August 1, 2016
taco eater :
Jacob Dodge from Middletown, CT United States
This fits the pinto with the low ape bars perfect. Absolutely perfectly.
Was this review helpful to you?
0 taco eaters like this review
15mm bing puch maxi 1977
January 11, 2016
taco eater :
Country boy tunning from Princeton , MA United States
I Don't think the bend is removable? If your having a difficult time getting the bend to clear your choke lever here's the trick ( the black cover on the choke lever will pop off then you can push the rod thrue the carb cover from the top)
Was this review helpful to you?
0 taco eaters like this review
Rip Rip rip...
September 11, 2014
taco eater :
David Szego from Vaughan, ON Canada
Shouldn't rip this easily. Tried two, won't try 3.
Fits 1977 Cimatti City Bike, with some work 
15mm bing puch maxi 1977 
Rip Rip rip...