MLM honda express NC50 NA50 next level STOCK pipe
MLM honda express NC50 NA50 next level STOCK pipe
 



  $179.99

 :HERE NOW!!

Free Shipping
qty:

 
 
an insanely high quality "stock like" pipe for honda NC50 and NA50 express made in the usa by MLM!!! beautiful lusty black finish and black painted heat shield! so nice. this is a really cool upgrade for a stock bike or sleeper build as it is much higher flow than the stock pipe.

tired of all these "performance" chambers and just want to keep it simple?!? this is for you!!


Features:
Perfect mounting
25mm ID header
31.7mm OD on pipe flange (take note if using on stock cylinders)
1/4" mounting flange
18 gauge steel cones
Hand tig welded all around
7 gauge rear mount tab
High temp black powder coat
And....a good night's sleep knowing you bought the right pipe

plus a nice silver heat shield!

***ATTN*** due to a recent rash of confusion from the confusers out there, we must state that the fender bracket is not meant to be used on the pipe itself like on the stock setup, but rather mounted opposite, on the left shock mount. now when you bottom out your suspension and hit the fender with your tire, there's less of a chance of tearing your pipe off! THX MLM!!

taco rating taco rating 4.5 of 5 4.5 of 5 Total Reviews: 6 give your taco rating here

  0 taco eaters like this review
 
4 of 5 Bolt on? July 15, 2023
taco eater : Anonymous Person  
Happy with the look, performance and sound of this exhaust, which is not so overly loud as my prior side bleed pipe. Very pleased with the separate left side fender bracket! A real bonus! My NC50 is kitted, but still has the stock head. The mounting bracket hole on the right side does not line up properly with the hole near the stator. It is about 1/4" too low, so unable to put a bolt thru it. Tried riding a few miles on pavement with a zip tie at that spot, but the two other bolts that attach the pipe to the head worked loose. Sorry to say I am disappointed ) : #  Not able to cut and weld the bracket back on, and no idea where to begin with bending the pipe either. What to do?

Was this review helpful to you?

  0 taco eaters like this review
 
5 of 5 Ripper upgrade and easy install. March 15, 2023
taco eater : Anonymous Person from Bakersfield, CA United States  
Mounted this bad boy today and couldn't be happier. Nice peppy sound and gained some MPH. Direct bolt on.
The new fender bracket doesn't mount on the shock as described. It replaces the entire rear fender bracket mounted on the left side. You will need a nut to secure. The original bracket has nut built in. Easy as pie.

Was this review helpful to you?

  1 taco eaters like this review
 
5 of 5 Well worth the money! January 13, 2022
taco eater : Wayne Smith from Livingston, West Lothian, Scotland  
Well worth the money! Excellent quality.

Thanks for the FREE stickers too! :-)

Was this review helpful to you?

  3 taco eaters like this review
 
4 of 5 Jurys still out on performance June 23, 2021
taco eater : Anonymous Person from Coon Rapids, MN United States  
This thing is NICE looking. I had to do some trimming and enlarging of the mounting hole due to my 60cc kit. The sound is nice and I think it pulls harder on take off, but I still top out at 30ish mph. If further tuning gets me somewhere I will update this review.

Was this review helpful to you?

  5 taco eaters like this review
 
5 of 5 Sleek look and nice sound and preformance. May 16, 2020
taco eater : Emery Herman from Waterloo, IA United States  
This pipe is bigger and more refined looking than the original pipe. It has helped me reduce four stroking at top speed as my old exaust was pretty clogged. It has a peppy sound to it but it is not excessivley loud by any means. It comes with a matching black bracket to support your rear fender. I would reccomend this to anyone looking to freshen up their stock or stockish express.

Was this review helpful to you?

View All Customer Reviews