taco eater :
A to tha G from Palm Coast, FL United States
I dunno what everyone else was riding, but this fit like a dream on my stock intake and 15.15 SHA.
Was this review helpful to you?
0 taco eaters like this review
Does not fit 12:12, 14:9
July 24, 2017
taco eater :
river2strokes from Columbus, OH United States
Does not fit 12:12, 14:9
ha
Was this review helpful to you?
1 taco eaters like this review
tight in carb, loose on intake
May 3, 2017
taco eater :
Anonymous Person from Pataskala, OH United States
I also had to pound this thing to get it to fit into my tomos' stock dellorto 14.12 carb. before that I slid it onto the intake and it was pretty loose. I could spin it freely. Now I need to fix the airleak that resulted from it.
Was this review helpful to you?
3 taco eaters like this review
Not the one in the picture
March 25, 2014
taco eater :
JAMMIN from Warren, MI United States
So the shim in the picture is what u want but I did not get. I received a shim that was 1.5mm thick but was 5mm too short AND had a lip that was on the outside only allowing the shim to go partially into the carb. It fit tight but my motor was running WILDLY from a MONSTER air leak. I chipped the lip off with a screw driver, then filed it smooth and used a socket to tap it ALL THE WAY into the carb intake. THEN it sealed and my motor idled normal and ran great. Beware of the inverse shim. This is also the shim you want if your Rad enuf to have a kitted MO1.
EDIT benji : HEY i think we sent you the wrong shim as that does not sound like this one. the photo measurements and description for the one above are correct. super sorry. contact us and we will take care of you!!!!!!
Was this review helpful to you?
1 taco eaters like this review
Shim
July 9, 2012
taco eater :
nicky
Used this on my SHA 15:15 very tight fit as I had hoped for and works a TREAT !
Shims right, ships tight 
tight in carb, loose on intake