Sachs 504 stator and flywheel ignition completo
Bosch 80mm stator and flywheel for Sachs 504
 
  $120.00

 :HERE NOW!!

Free Shipping
qty:

 
 
This is the small size Bosch ignition for sachs 504.

WILL NOT FIT ON SACHS 505!!

Check your existing stator and make sure it is 80mm to ensure this fits & that it is bosch or you will be sad.

This is the style that does not require an external ignition coil. The ignition wire comes off the stator and connects straight to the plug. Use your existing spark plug boot or grab a nice new NGK one!!

6v 17w light coil

Definitely best for stock setups!!! Blasters look elsewhere plz as these stators with the high tension coil on the stator plate don't like your style.

also, the cutout windows on this flywheel can be somewhat problematic depending on where you're setting your point gap. if this is giving you trouble, simply reuse your old flywheel!

taco rating taco rating 1 of 5 1 of 5 Total Reviews: 1 give your taco rating here

  2 taco eaters like this review
 
1 of 5 You might be sad anyways if you have a 504... April 11, 2022
taco eater : Graham from Canada  
The stator setup is not bad, what you'd expect for a knockoff. The wiper is kinda sorta hanging in there and the points block their own mounting screw, but that's normal stuff. The real letdown is the flywheel, which has an extra 90 degrees of ignition advance! If your existing flywheel is good, you're good. If you need the flywheel, buy some different parts.

Was this review helpful to you?